Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a UC520 connected to a group of 7945 phones in the office, and Verizon POTS on the outside. If you're having a conversation with someone who happens to be an outside caller, is the conversation full duplex - meaning can both sides talk at th...
We tried connecting analog phones to the Verizon FIOS lines, and found no noise or echo. Tried replacing the wires that connected the UC520 with the FIOS box. No change seen. Ran impedance test on all lines, and set impedance accordingly. No chang...
There are a slew of dial peers, most of whom have nothing to do with those outside lines. Do I need to set this on all dial peers, or just the ones that seem to be associated with outgoing lines?Thanks
Barev!!Normal analog phone shows no noise and no echo. Here are the configs on the voice ports and the Ephones.voice-port 0/1/0 trunk-group ALL_FXO 64 supervisory disconnect dualtone mid-call input gain -3 timeouts call-disconnect 3 timeouts wait-re...
