Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anyone configured an OC3 interface for a connection to an alcatel microwave/radio link. We have a private 155mbps microwave service running over alcatel equipment and we are using a 3620 with an OC3 interface at each end to connect to the alcatel...
We have a site to site vpn running an ipsec tunnel with 3des encryption and a 155Mbps ATM link between the two (bridged with 3620 routers). The throughput and response times between the two sites is less than expected with intermittant periods of del...
Thanks for that. I am going to try the tests you suggest shortly and try and isolate the problem to the routers or the transmission - have to wait a week or so before they will give me an outage.
Performance is very erratic - It is like it is very quick and then suddenly loses a packet, waits and retansmits.The RTT is quite quick - the service is just a point to point link of about 1 km or so on microwave. See below for an example of typical ...
Thanks for that,We are using PIX 515's and they may be oversubscibed but from some basic logging I have been able to do it only looks like we are getting about 25-30 Mbps max and averaging around 8Mbps (1MB). At the same time users are constantly com...
