About AshP83606

AshP83606 · 02-17-2021

I have a network of 5 routers that are connected with OSPF. I should be able to ping any interface from a given router. These are my interfaces, IP addresses, and subnet masksR1:Int s0/0; 172.16.32.5/30; 255.255.255.252Int s0/1; 172.16.23.5/30; 255.2...

AshP83606 · 02-19-2021

Attached is a text file with configurations of all five routers. I removed the clock rate so that only one side now has the clock rate. I think I am still overlooking something because I cannot ping R5 s0/1 or s0/0 from R1 s0/1 or R5 s0/1 or s0/0 fro...

AshP83606 · 02-19-2021

For the R5 interfaces (as well as my other interfaces on the other routers) have clock rate 64000. From the .cfg: ```interface Serial0/0ip address 172.16.23.9 255.255.255.252ip ospf message-digest-key 1 md5 clock rate 64000!``````interface Serial0/1...

AshP83606 · 02-19-2021

When I try running R5#s ru | sec int, it says "invalid input detected at '^' marker. R5#s int s0/0 outputs: ```R5#s int s0/0Serial0/0 is up, line protocol is downHardware is GT96K SerialDescription: switch port connection to DNS serverInternet addre...

Member Since	‎02-17-2021 08:59 AM
Date Last Visited	‎03-14-2021 09:49 PM
Posts	4

User Statistics

User Activity

OSPF Line Protocol is Down for Interfaces under 172.16.23.0/30 subnet and no routing information sources

Re: OSPF Line Protocol is Down for Interfaces under 172.16.23.0/30 subnet and no routing information sources

Re: OSPF Line Protocol is Down for Interfaces under 172.16.23.0/30 subnet and no routing information sources

Re: OSPF Line Protocol is Down for Interfaces under 172.16.23.0/30 subnet and no routing information sources