Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am using a Pix 525 6.3(5) and mistakenly had debugging in place for too long, while troubleshooting some issues. Doing a show blocks, shows the 256 block filled to capacity ,therefore it is not logging correctly, nor can I change the queue setting...
I have 2 3020 Concentrators that are both running the 4.7.2.I Aug 03 2006 16:30:26 code. The issue I am having is that backup will not go into backup mode, but stays in INIT mode. This is due to the fact, whenever I enable VRRP. Save.. Then, come ...
Hey Everyone, I have 3 networks:Protected 172.18.0.0/24 Vlan 1DMZ - 10.0.0.0/24 ->Vlan 1 192.168.1.0/24 ->Vlan 100I need ACLs on the VLAN 100 to disallow traffic from the 192.168.1.0 to initiate to anywhere with exception of 10.0.0.1.Howev...
IP Routing is enabled. I really do not want to post my whole config on here. Both VLAN Interfaces are up.Do the ports in Vlan 1 need vlan 20 also allowed?Or something else?Thanks
