About Marc OolB

Marc OolB · 03-05-2021

Hello everbody,I bought an RV160 just to make a nat translation form one router to an networkTopology = Cisco877>>>CiscoRV160>>>>customer networkI am having this problem, I would like to NAT an adress 172.16.244.22 on my wan port to a 192.168.253.10...

Marc OolB · 03-16-2021

Lets say i would use 172.16.244.21 as my wan adres and I would make a nat rule on 172.16.244.22To which adress should the server send the packets then?it is not logical to me because there is no interface with 172.16.244.22

Marc OolB · 03-15-2021

I add the setupWhat to configure in the RV160 to get the packets from A to B

Marc OolB · 03-10-2021

WHy not, the 877 has lan 4 ports, one is connected to the windows server with ip 172.16.244.10he other port is connected to wan port of the rv160

Marc OolB · 03-09-2021

Hello Paul,noI just would like to have ha single static network translation, nothing moreI would like to NAT an adress 172.16.244.22 on my wan port to a 192.168.253.10 adress on my lan side.

Marc OolB · 03-08-2021

Hello Paul, I want to introduce the rv160 in a parallel way, both paths have to be up so we can do a migration.so path 1: 877>>>>windows server>>>> customerpath 2 877>>>>>>>>>>> customerI cannot make changes on path 1 because of 900 connections d...

Member Since	‎03-05-2021 07:09 AM
Date Last Visited	‎03-19-2021 12:01 AM
Posts	13

User Statistics

User Activity

RV160 NAT

Re: RV160 NAT

Re: RV160 NAT

Re: RV160 NAT

Re: RV160 NAT

Re: RV160 NAT