About Juergen.barth

Juergen.barth · 03-18-2021

Hello, i would like to setup a small VLAN config on a SG250-08 with firmware image_tesla_cbs250_hybrid_2.5.7.85 I have a Windows 2016 DHCP Server on gi2 and some VLAN´s (10,20,30) on the switchports. I configured this with help of cisco documentation...

Juergen.barth · 03-19-2021

Thanks for you help,i solved my problems so far, my DHCP was not able to provide more than 1 DHCP Scope.Now i use a Windows 2019 with some VLAN's (1,20,30,40,50).I configured the SG250-8 with IPv4 IP´s for all Scopes, activated DHCP Relay and added t...

Juergen.barth · 03-19-2021

Hi,i have a new setup for my SG250-08 On GE2 i have a small AVM Fritzbox with IP 192.168.30.109 and a DHCP Range from 192.168.30.20 to 192.168.30.50. I have 2 VLAN´s and i configured two IPv4 Management Interfaces for these two VLAN´s (1,30) VLAN 1, ...

Juergen.barth · 03-19-2021

Thanks, the aruba and the sg350x are working out of the box, with no configuration or any VLAN. I will try with a soho device (LANCOM or Sophos XG Firewall) at gi2 interface.This device will present the DHCP Server, so i eliminate the other switches ...

Juergen.barth · 03-18-2021

Thanks, the DHCP Server is running as a Guest in a Hyper-V Server. So the DHCP Server (@Hyper-V) is connected to SG350X-48P at a 10GBe Interface. This Switch is connected to a HP/Aruba Switch. My Workplace is connected to this Aruba Switch and at my ...

Member Since	‎03-18-2021 10:03 AM
Date Last Visited	‎03-21-2021 02:25 PM
Posts	5
Total Helpful Votes Received	10

User Statistics

User Activity

SG250-08 DHCP Relay gi2 to VLAN

Re: SG250-08 DHCP Relay gi2 to VLAN

Re: SG250-08 DHCP Relay gi2 to VLAN

Re: SG250-08 DHCP Relay gi2 to VLAN

Re: SG250-08 DHCP Relay gi2 to VLAN