About plu

plu · 03-23-2021

I'm able to get to the 3132Q-32 40Gbps switch via the serial console, and would like to add additional management connectivity. The switch currently has username admin configured, with no password. It seems I may need a password to be able to SSH to...

plu · 03-23-2021

I'm trying to connect a SG500X-24 GigE switch to a 3132Q-32 40Gbps switch using a 4-to-1 (40Gpbs-to-4x10Gbps) breakout cable. It seems I need to do some configuration on the 3132Q-32 to get the 40Gbps port (port #2) up and running to connect over the...

plu · 03-24-2021

I came across this interface configuration guide for Nexus 3000 (release 6.x, close enough to the 7.3 I'm using)...and it provided the information I needed (at least for the most part). https://manualzz.com/doc/23050114/cisco-nexus-3000-series-nx-os...

plu · 03-24-2021

I just added a password to the (fixed) admin account with: conf tusername admin password xxxexit Now the "copy running-config startup-config" works fine. Thanks.

plu · 03-24-2021

Hi, I tried the "speed 10000" but it wasn't accepted. In Web searching more solutions, I saw that all my ports were set for breakout to 10Gbps, so I changed ports 3-32 to 40Gbps. Now I see:switch(config)# show int brief-----------------------------...

plu · 03-23-2021

I tried the "copy" command from the serial console, where I am supposedly logged in as user admin, and from the SSH session, where I'm supposedly logged in as user test (assuming NXOS works that way). Both ways result in the copy command failing wit...

plu · 03-23-2021

The command offered seems to work, so I have ports #1 and #2 set with: interface breakout module 1 port 1 map 10g-4xinterface breakout module 1 port 2 map 10g-4x with the intent of using port #1 for four 10g links to 10g controllers, over the muxed f...

Member Since	‎03-23-2021 10:34 AM
Date Last Visited	‎04-13-2021 01:08 AM
Posts	8
Total Helpful Votes Received	10

User Statistics

User Activity

Accessing NXOS on 3132Q-32, via SSH or browser (if available)

Connecting SG500X-24 to 3132Q-32 using 4-to-1 breakout cable, etc.

Re: Connecting SG500X-24 to 3132Q-32 using 4-to-1 breakout cable, etc.

Re: Accessing NXOS on 3132Q-32, via SSH or browser (if available)

Re: Connecting SG500X-24 to 3132Q-32 using 4-to-1 breakout cable, etc.

Re: Accessing NXOS on 3132Q-32, via SSH or browser (if available)

Re: Connecting SG500X-24 to 3132Q-32 using 4-to-1 breakout cable, etc.