Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, hoping someone can help me get to the bottom of this.
I have 3 x 2702i APs connected to a 2960X-FPD and registered on a 2504 WLC running 8.2.121. 2 of these APs are connected to downstream devices using the AUX port.
AP1
AUX: No connection...
In case it helps anyone, I worked this out with a bit of debugging. The AP gets upset when it sees CDP messages from more than one host on the AUX interface. The workaround was to disable CDP on Gi1 within the AP interface settings page on the WLC...
