About anirudh12b9

anirudh12b9 · 08-29-2015

Hi All,I am unable to telnet my access switch which is in network.With ip 10.120.232.12 actually i am able to login through ssh but am unable to login through the telnet.show run interface vlan 10Building configuration...Current configuration : 242 b...

anirudh12b9 · 06-20-2015

Hi All,Any one please resolve my query.There are two vlans i.e vlan40&vlan50.I have two access switches in one switch i have configure vlan40 and i have assigned ip from range(192.168.10.1-192.168.10.10) to 10 desktops connected to 1st switch.Know in...

anirudh12b9 · 09-01-2015

Hi, As all the ACL's are created in our CORE SWITCH (L3) and we are using them in L2 switch.

anirudh12b9 · 09-01-2015

Hi,unable to execute the below command.I am using the command in cisco 6500 swithcFYIshow control-plane feature ^% Invalid input detected at '^' marker.

anirudh12b9 · 09-01-2015

Hi,As all the ACL's are created in our CORE SWITCH (L3) and we are using them in L2 switch.As you suggested ssh is a good practice thanks for that .But how can i check what rules are written in access-class 3.If am using the show access-lists 3Standa...

anirudh12b9 · 09-01-2015

Hi Mark, Thanks for the reply below are the permit statements allowed it access-list 3.Please guide how to check the what rules written in access-class 3.And able to telnet the below ip 10.136.169.110,10.120.232.25,202.9.192.64and202.9.192.96. ...

Member Since	‎06-20-2015 10:55 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	8

User Statistics

User Activity

Telnet problem to access switch

How can the communication from two different vlans of same segment can happen

Hi, As all the ACL's are

Hi,unable to execute the

Hi,As all the ACL's are

Hi Mark,