Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I am looking at setting up a Cisco ACS 5.3 for MAC address based VLANs on a 2960 switch.as anyone done this before? Basiacally what I want is 1. Have a list of devices specified in the ACS with their MAC address2. Connect the swicth to the AC...
Ok got it working to a certain extent. I have internal hosts and I have managed to get them to get network access with an Authorization Profile which gives them access and puts them in a VLANNext question is how can I get different host groups to ...
Ok got it working to a certain extent. I have internal hosts and I have managed to get them to get network access with an Authorization Profile which gives them access and puts them in a VLANNext question is how can I get different host groups to use...
Thanks Mate,Looking at the switch I dont apper to have the mab command in interfaces..It comes up on some other switches though.I have also not been able to see where to link " authentication profiles" to "hosts"
Hi,Effectively what I want is to have a list of known device(laptops/desktops) mac addresses stored on the ACS.When a device is connected to a switch it should talk to the ACS and check if the mac address is known. The ACS should also tell the switch...
