About Anonitachi

Anonitachi · 04-21-2021

Hey all, A bit of hand-holding needed. Setting up two VLANs on a router - 10 & 20, and I'm completely stumped and could use advice. The first thing that I've setup is the gigethernet0/0/0 with an IP and, 0/0/1 with no IP (fake ip address used here) R...

Anonitachi · 04-23-2021

Rick, IO had figured out/read-up on, the switchport and used range to include a number of ports ex: int range fa0/19-20. In regards to the 172***, totally my fault on that one. It wouldn't register in my brain so many thanks for clarifying. I will bo...

Anonitachi · 04-22-2021

It has worked @martin. Many thanks! So was my issue the 255.0.0.0? Subnetting does blow my mind a bit. Two further steps that I don't understand..1) All of this was to get the ball rolling into VLSM and now that is talking about 172.*** (?) with VLAN...

Anonitachi · 04-21-2021

Thanks for the prompt response, Martin. I did try 255.255.255.128 and 255.255.0.0 (for 64 hosts) but that didn't take either. G0/0/0, G0/0/1 & G0/0/1.10 are all up.G0/0/0 has an ip and mask of 80.0.0.1/8 (as you said) but, still getting the overlap i...

Member Since	‎04-21-2021 03:08 PM
Date Last Visited	‎04-24-2021 02:04 PM
Posts	4

User Statistics

User Activity

Inter-vlan issue 'IP' Overlaps with gigabitethernet0/0/0

Re: Inter-vlan issue 'IP' Overlaps with gigabitethernet0/0/0

Re: Inter-vlan issue 'IP' Overlaps with gigabitethernet0/0/0

Re: Inter-vlan issue 'IP' Overlaps with gigabitethernet0/0/0