Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are having issues with the Meraki MDM dashboard. When we hit save after making changes such as adding tags or an owner it just sits. It does give an error, doesn't say the changes are saved, it never reacts. We are also have an issue with a pho...
I have a MX64W configured as a spoke. It is connected to the hub by a Cat6 cable. The distance is approx 75 yards. The devices connected directly by patch cable to the MX have decent speed. Users are complaining about the speed of the wireless. U...
My APs are MR42s and MR33s. I have an internal SSID on its own VLAN. Can the internal SSID be locked down to domain users only? I would like to set up a Guest SSID for devices that don't need access to internal resources other than the Internet. How ...
I have a site-to-site VPN using a MX250 as the hub and a MX64W as a spoke. The MX64W is connected to the network using a CAT6 cable connected to an MS120 switch in the main network closet. Wireless connections on the MX64W receive dhcp addresses fr...
We have been using MDM for 18 months. We have figured out a lot but still have questions. Where or Who is the best place for MDM training? Or maybe some consulting time where we could ask questions specific to our environment.
The MX64W is an access point. We have a MX 250 as our primary security appliance. No other access points other than the WAPs. The MX64W is approx 75 yards from the MX250 and is connected by a CAT6 cable. The users notice slow access whether they are...
