I have a static nat table with this rule( i have put in X to cover my publci ip for security reasons for this post)static (inside,outside) 65.91.XXX.XX 192.168.211.1 netmask 255.255.255.255 0 0How do I remove just that one line without clearing the e...

I have a reverse Nat table in my fix 515E router. There is a line in the config: nat (inside) 1 access-list 100 0 0It appears right up the individual table entry lines for the reverse NAT. Does that line mean I can have only 100 enteries in that tabl...

Is there a command I can enter in my config on the pix to log inbound traffic that is trying to come through a certain port? If so what is the command and how do I access the log?

I need to open port 3306 for inbound traffic on pix 515 E so i added the follwing line in after my other ports:access-list InboundFilter permit tcp any any eq 3306I also have the line:static (inside,outside) (my public removed for security) 192.168.1...

I have pix 515e sitting in front of a webserver that is running linux and mysql. Mysql requires port 3306 be open so in the config on the pix would i just a access-list InboundFilter permit udp 3306 access-list InboundFilter permit tcp 3306or do i al...