About Raj .G

Raj .G · 08-29-2016

We are using WLC 2504 with 2 Access Points AIR-CAP2702I-D-K9. I'm facing some slow performance issue with wifi enabled clients(Macbook Pro). As all the clients we use are Macbook Pro laptops which supports 802.11ac, I created a new WLAN(SSID) with Ra...

Raj .G · 08-27-2016

1 WLC 2504, 2 Access Points and 1 netgear prosafe router connected to Cisco sg300 switch. We have 16Mbps leased line for 30 members. The MRTG graph of leased line ISP shows very less usage of internet but the speed we experience is very slow browsing...

Raj .G · 09-03-2016

What is the DCA channel width configured in 802.11a/n/ac band (20MHz,40MHz or 80MHz) ? I set it to 40MHz width! When the clients were in 2.4Ghz I could see between (-50 - -67)dbm and I remember mine was around (-65 - -67)dbm. After forcing to 5Ghz...

Raj .G · 08-31-2016

(Cisco Controller) >show client detail client_mac_addr Client MAC Address............................... client_mac_addr Client Username ................................. N/AAP MAC Address................................... AP_mac_addrAP Name...........

Raj .G · 08-31-2016

As you said after changing the Country to match mine worked!. I could see the SSID in the available networks & my clients can connect to 5Ghz band. Thanks!

Raj .G · 08-31-2016

I worked!. Thanks!. Any idea why my bandwidth is very low from below stats, I was expecting it to reach 1G(~900): Wireless iperf -c 192.168.1.30 -i 1 -t 60 -w 1M------------------------------------------------------------Client connecting to 192.16...

Raj .G · 08-30-2016

Iperf results, Client(wireless): iperf -c 192.168.1.30 -P 6 –w 256k -r –t 60iperf: ignoring extra argument -- –wiperf: ignoring extra argument -- 256kiperf: ignoring extra argument -- –tiperf: ignoring extra argument -- 60---------------------------...

Member Since	‎08-24-2016 12:46 PM
Date Last Visited	‎05-13-2018 03:02 AM
Posts	19

User Statistics

User Activity

WLC 5Ghz enabled SSIDs not visible in available networks

WLC 2504 slow performance, slow internet

What is the DCA channel width

(Cisco Controller) >show

As you said after changing

I worked!. Thanks!.

Iperf results,