Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,We've just deployed a scenario with CM/Core in our Main office and Edge in remote office. We're using DMPVN between offices with lowered MTU/MSS over the tunnels (1400/1360 respectively). The traffic itself between the offices works just fi...
Hello All,We've implemented PBR between our main and branch offices. However, it seems to have issues - the packet losses (via ping is extremely high, the traffic gets interrupted, etc. Does anyone have any information on how to troubleshoot it?Here'...
Ok, to update this topic. After some traffic capturing and analysis we came to conclusion that the problem is not WCCP or MTU in that case but the CBAC firewall in DMVPN routers. Since we have 12.4 (non-T train), they don't support ip inspect WAAS co...
Hi, I forgot to mention that we have WAE's connected to the core switches instead of DMVPN routers (this solution had been suggested by Cisco Pre-Sales so we went ahead with it).Thx, Serge
Hello and thanks for an answer,We run ISO 12.4(17) (not a T-train, had some issues with it before) on both DMVPN routers. However, WAE's itself connected to the core switches:Main site Catalyst 65xx (IOS 12.2(33)SXH)Branch site Catalyst 3750 (IOS 12...
PBR works as expected, but after a day or two the above described sympthoms occur. I haven't tried desabling ip inspect. Will do that and will let you know.Update: Just turned off ip inspect however, i can still see the packet loss. Weired thing is -...
