Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, Recently we've been working on deploying new 9800-80's and currently have them set up in our test environment, they are running 17.3.3. We are presently using ISE 2.7.0.356 as well. We've set up a CWA Guest Portal and our redirects are present...
Good morning Grendizer,First, thank you for your continued help. I really appreciate you taking the time to help me try and solve this issue.Secondly, it was the ACL. We're going to look into the best practices for deploying the VRF's design, but as ...
Ok! Try two (didn't sanitize my debug enough, I've double checked and removed every identifying element in the debug) 1. WLC Code is 17.3.3, and we're using ISE 2.7 on Patch 4.2. We've tried various AP models: a 3802i, 2802i, 3702i, and a 2702i. The ...
Hi Grendizer,1. Version is 17.3.32. We were initially using an AIR-AP3802i-B-K9, but switched to using AIR-AP2802i-B-K9. I've also tried a 3702, problem persists across models.3. AP's are in Local Mode, we don't utilize flex.4. This is not a Foreign/...
Hi Grendizer,I had ran into this previously, but had already made these changes as well. The captive portal is working as expected. My failure occurs here: While the page shows "Connection Successful" users have to hit "Cancel" and then "Use without ...
Unfortunately, even after patching ISE - the issue still persists. At this point, we're out of ideas and will be looping TAC into this. Thanks for the suggestions everyone.
