Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,just a question how to restrict dialup users for certain NAS servers.We have an ACS2.6 AAA servers and several 3640 based NAS sever for user dialup. The users are collected into a group in the ACS.We have an other group, called ISP. The user in...
Hi,I've a Cisco3640 router configured for ISDN backup and dialin purposes. The dialin clients are authenticated with their NT Domain username/password through the ACS. The asyn dialin facility works well but the ISDN clients cannot connect, they get ...
Mynul,my problem was that I put the reasonable commands into the NAS/PORT section and after submitting the change I didn't get the same data what I wrote in. I saw several "?" after the NAS name. I thought that I made a mistake regarding the syntax b...
The working config:Virtual template intermface must be defined!!!aaa new-modelaaa authentication login default group tacacs+ localaaa authentication enable default group tacacs+ enableaaa authentication ppp default local group radiusaaa authenticatio...
I tried both method(asyn and ISDN) from the same W2k machine.To avoid the conflict I configured the Dialer0 interface for the same as Dialer 13 and shut down the other unused Dialer interfaces.Te deb dialer event commend doesn't provide any result re...
I removed the ppp authentication CHAP for the PRI but it still doesn't work.Here are the ISDN outputs:szertr5#u allAll possible debugging has been turned offszertr5#deb ppp negPPP protocol negotiation debugging is onszertr5#.Dec 16 12:29:29: %LINK-3-...
