Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are seeing the the same thing on an ASA5505. The initial discover gets a response, but the request during a client renew, gets a ACK being delayed and will be sent later message.
Thanks for the info.Both parties have been engaged and are working collaboratively on a solution.The problem is now we have different types of AP's running at different BI's. Setting them all to 102ms had no effect on the situation either.
Guys,This is what we found the issue to be. The Beacon Interval of the 1252 is running at 102ms as opposed to the recommended 100ms (even by Cisco for their 7920 and 7921 phones). I have a TAC case opened with the highest severity because the phones ...
Hans,We are experiencing the exact issue you are describing.We are running WiSM controllers with the majority of 1242 AP's. We also use Ascom phones as opposed to the Nokia's.We brought up a new wing of a building on a 3750E and 9 - 1252's and we ran...
I was having the same issue and tried everything, except for assigning the actual Interface. I had tried the IP, but not the interface itself. I just figured that the outside interface IP was just to be used for management on the ASA and that I just ...
