About chaffner1

chaffner1 · 08-25-2021

I have a Catalyst 4510 with a bit of an odd issue. If any of the network modules (that is, any of the modules that are not either of the two supervisors) are powered down via CLI (no hw-module module # power) or physically removed from the shelf, th...

chaffner1 · 09-03-2021

Thank you, but would you please advise, is this different from what is loaded onto the supervisors and, if so, where would I pull this information from?

chaffner1 · 09-02-2021

First, thanks to everyone for all the help. I replaced the chassis with one that I know is good. However, the problem did not go away. But, in the process, I was able to gather new information. As I brought up the new chassis, I tested each card ...

chaffner1 · 08-30-2021

Thank you, Giuseppe. That seems to be the direction this is going in (replacing the chassis).

chaffner1 · 08-30-2021

I'm sorry, but I am not familiar with the term "line card". Would you be more specific?

chaffner1 · 08-27-2021

Thanks for your reply.Regarding the module status led-indicator, it starts off red (when powered down), then goes amber during the boot up phase, briefly turns red after the boot up phase fails and then goes amber again when the boot up process resta...

Member Since	‎08-25-2021 06:39 AM
Date Last Visited	‎10-08-2021 12:04 AM
Posts	6

User Statistics

User Activity

Catalyst 4510 networking modules power restoration problem

Re: Catalyst 4510 networking modules power restoration problem

Re: Catalyst 4510 networking modules power restoration problem

Re: Catalyst 4510 networking modules power restoration problem

Re: Catalyst 4510 networking modules power restoration problem

Re: Catalyst 4510 networking modules power restoration problem