Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a IPSec VPN setup on my ASA which allows the client to reach the inside. I've added a DMZ and I would like to allow VPN access to it as well. I have made the configurations to allow access but it's not working. Can some please let me kno...
I need some help I'm trying to allow traffic from the inside access DMZ server using several ports. I believe NAT is a issue. I can ping the DMZ server from the inside. Here are the key items that defined: Inside144.244.244.0/24 DMZ1192.168.44.0/24 D...
Hi, I have a device in my DMZ that needs to talk to my inside network server. I can't telnet using the ports that I have listed in my access list. Packet tracer shows that the TCP traffic is not blocked from the inside to the DMZ1. packet-tracer inp...
I need some help trying to allow outside Plex traffic to connect to my internal Plex media server.Plex uses tcp 32400 port and I want it talk with my MS 144.244.0.1 which is on the inside). I keep getting this error: %ASA-7-710005: {TCP|UDP} request ...
Hello Everyone, I'm trying to allow access to a DVR so that I can access it from the outside using port 37777. The app on the phone is using the outside IP and port 37777, but the the firewall is showing: %ASA-7-710005: {TCP|UDP} request discarded f...
I will test this out after I finish testing some changes that i made. Idont think that packet tracer will work with another VPN IP. I connectedup to the VPN and tried to ping a DMZ device it failed.
I've made the changes that you have suggested, but no joy. packet-tracer input outside icmp 124.140.1.1 0 0 192.168.44.4 detailedPhase: 1Type: ACCESS-LISTSubtype:Result: ALLOWConfig:Implicit RuleAdditional Information:Forward Flow based lookup yields...
I've used https://www.petenetlive.com/KB/Article/0000070. A long time ago in creating the IPSec VPN. But it does not cover adding another network such as the DMZ so that VPN client can get to it. As for Access-list Dmz1_Access_In extended deny ip an...
access-list Split_Tunnel remark Duke Networkaccess-list Split_Tunnel standard permit 144.244.244.0 255.255.255.0 <<- if this INside subnet then it correct (This is correct, please see the config that I sent) access-list Split_Tunnel remark VPNaccess...
