About carouse2

carouse2 · 08-30-2021

I have a 9800 controller in a datacenter, with 2 vlans existing on that network (vlan 940 and 1620), both of which I am able to connect an AP and see reach that client network through the controller. I have another network that is separated by 2 rou...

carouse2 · 09-01-2021

Thanks Scott. I have flexconnect setup as shown. I see the vlan name On the AP, I am running: show capwap reap association and I see the mac address, IP address (statically assigned on the device) but no gateway or netmask. show capwap reap associ...

carouse2 · 08-31-2021

Thanks Marce1000. I can see the client on the controller through the AP as a client (its statically assigned) but not getting out from the controller.

Member Since	‎08-30-2021 07:50 AM
Date Last Visited	‎09-22-2021 07:53 AM
Posts	3
Total Helpful Votes Received	5

User Statistics

User Activity

9800 WLC APs connected but cannot pass client traffic

Re: 9800 WLC APs connected but cannot pass client traffic

Re: 9800 WLC APs connected but cannot pass client traffic