About rhohemberger

rhohemberger · 01-20-2013

Hello to all,I'm trying to upgrade a switch SRW224G4 but without success.Model Name SRW224G4 Hardware Version 00.03.00Boot Version 1.0.0.06 I send the file via the XModem( SRW2xxG4_FW_1.2.3.0 ).Has anyone encountered this problem and managed to solve...

rhohemberger · 01-04-2013

Hello,I'm having a problem.I can not access the switch through the console. The web interface is working properly.Model: SRW224g4Below some pictures.The HyperTerminal settingserror:If anyone can help me?Thank you and excuse the bad English.

rhohemberger · 01-20-2013

Hello Tom,Thanks for answering.I uploaded this firmware without success.It's the same error

rhohemberger · 01-05-2013

Hello to all,Good news, I solve the problem. Below is what I did:Cables:DB9( female ) -DB9( female ) USB - DB9(male)Connecting the switch to pcInstalled to the USB drive and did the settings of Hyper Terminal and finally worke...

rhohemberger · 01-04-2013

One thing I found strange is that in all other models switch the cable is reversed. The switch is connected to the RJ45 and DB9 is connected to the PC.I have an adapter here, I'll try to use it.Thank you- Rumenigue.

rhohemberger · 01-04-2013

Hi Tom,When setting up hyperterminal, the option to select the COM port does not exist, only tcp / ip (ssh) or tcp / ip (winsock).Note: In the second photo, we can see how cable is connected. The tip with the DB9 connector is connected to the switch ...

Member Since	‎01-04-2013 01:51 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6
Total Helpful Votes Received	4

User Statistics

User Activity

I can not upgrade firmware SRW224g4

I can not access the switch through the console (solved)

I can not upgrade firmware SRW224g4

I can not access the switch through the console

I can not access the switch through the console

I can not access the switch through the console