Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I recently have run into an issue where PDM for older PIX firewalls does not load, It allows you to log in but the PDM window just does not load. If you notice you'll see an error in the lower left of IE that says: exception: java.lang.ArrayIndexOuto...
I currently have a UC520 system that CUE time is incorrect on by 5 hours. I have set the time with both Configuration Assistant (the most current version) and from the command line. Last night I also attempted to set the ntp server while logged into ...
Hello, I am working an older Call Manager System 4.0 and found that when it was installed it was installed with only one "The Boys from Liverpool" MOH file. Which now one here likes and of course I open my mouth and tell them there should be other ch...
The fix for this is fairly simple:go here: https://www.myciscocommunity.com/community/smallbizsupportLook for the link: UC500 Software Download - Cisco Smart Business Communications Systemshttps://supportforums.cisco.com/docs/DOC-9829Accept the agree...
Alan, Information requested below: ColRheumUC520#sh ntp statusClock is unsynchronized, stratum 16, no reference clocknominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision is 2**32reference time is CEB17784.2B1E292A (12:16:04.168 PST Fri ...
Brandon, I don't believe the PIX is setup to nat the 10.1.10.0 address space.Here is the output from CME ntp status:ColRheumUC520#sh ntp statusClock is unsynchronized, stratum 16, no reference clocknominal freq is 250.0000 Hz, actual freq is 250.0000...
Brandon, CUE is not pointing to 10.1.10.2 for NTP and when I set NTP to it I also get the error message saying NTP server could not be contacted. I set ip nat inside on the interface as suggested and this also has not resolved the problem. This route...
Brandon, This is from the configuration: interface Loopback0 ip address 10.1.10.2 255.255.255.252 ip virtual-reassembly!interface FastEthernet0/0 ip address dhcp client-id FastEthernet0/0 ip virtual-reassembly duplex auto speed auto!interface Integra...
