Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm configuring SNMPv3 on MDS devices. I need help on how to associate Access List with SNMPv3 user.I managed to do it on Nexus switches as shown bellow.username xxxx role network-operatorsnmp-server user xxxx network-operator auth sha yyyy pri...
How do I limit number of login attemps on NEXUS working with TACACS+ ?And also how do I set an authentication fail massage?In IOS it was done with :aaa new-modelaaa authentication attempts login 5aaa authentication fail-message ^Failed login. Five co...
Hello,I don't have experience in multi vendor fabric.Try from one of the MDSs show fcns database detailshow fcns database detail | inc i xx:xx:xx:xx:xx:xx:xx:xx p 3 n 14
Hello Mauro,Did you connect a serial console to check for the errors?What if the issue is not the supervisors but the chassis ? Can yo check it with a different sup before you purchase new ones?Regarding the configuration, if you didn't save it outsi...
Hello Mauro,It is very unlikely to loss both Supervisors on the same MDS9513.Have you tried power off the device for a few minutes, remove all cards and power on only with one of the supervisors?If not working try the same with the other supervisor.M...
