Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I received the following request:pLease make a Firewall Adjustment to ADD the Following DNS Names for each area: HTTP, HTTPS xx.example.com, yy.example.com, zz.example.comSFTP=Port 22 files.example.comWhen looking at the firewall rules, it lo...
It seems the webUI is no longer loading for me after I upgraded the software to 17.03.04a. Have I misconfigured something?
I am trying to access it from a laptop connected to G0/1/1 with IP 10.10.10.11 MASK255.0.0.0 GW10.10.10.254
Current Config...
If provided a Public WAN IP and a set of Public LAN IPs, where would I assign the Public LAN IPs? I have the WAN IP assigned to the Gb0/0/0 Port. I am unable to assign the LAN Public IPs to the actual NIM card slots, so would I assign the Public LAN ...
I've been working on configuring an ISR 4321 and I need to allow our Web Server to utilize a Public IP Address from our ISP, say x.x.x.34. I'm not sure where I should assign the Public IP Address. Should I make it the VLAN 3 ip address or the encap...
I've been working on configuring my first Cisco Router (ISR 4321) and I was hoping someone could point me in the right direction. Working through this, I was setting up DHCP on the router, and was confused on how to this might affect my current envi...
@paul driver Came in after hours and was able to get this working as I wanted it. Tried what you said once, and lost myself Internet access somehow. Reloaded and tried what you said above again after clearing the NAT translation list clear ip nat t...
Are we denying those hosts so I can utilize the static NAT I've already put in place? Also, I'm not sure what (specific lan subnet) is... Sorry I'm learning as I go.
So it's solely a NAT thing is what I think you're saying. I was trying to do PAT/NAT overload to accomplish this, but I didn't get very far due to an error.
I ran these commands but I got an error after the second one:
ip nat pool HbugPool 209.X...
Here's what I've got right now. Any help would be appreciated. I want 209.X.X.X to be the public ip for all users on VLAN4 (ip range 10.x.x.x). Note: I have a test VLAN where I can try to get VLAN5 (172.16.x.x) to look as if it's "209.G.G.G" until ...
