About plg_uxware

plg_uxware · 02-06-2017

Hello, I'm installing 4 SG500-52, these 4 switches are installed in the same 42U bay and connected all together true port 49 and 50 with CU1M cables. The firts one appear as the master and the 3 others as slaves. They are in L3 mode and 4 Queues wit...

plg_uxware · 02-12-2017

Hello, As you can see my NAS is seen by the switch. VLAN Interface IP address HW address status--------------------- --------------- ------------------- ---------------vlan 104 gi4/1/24 172.16.104.1 xx:xx:xx:xx:xx:xx ...

plg_uxware · 02-09-2017

Your right it's on this port. For example I can ping from my computer (on vlan50) on ge2/1/8 my pfsense firewall (172.16.50.1) on vlan 50 which is on Ge3/1/15. If I try to ping it from the switch (172.16.50.254) nothing arriving on the pfsense. ping ...

plg_uxware · 02-08-2017

Yes, you'll find it attached. I've started to switched ports where where pc, mac are connected from trunck to access ports.

plg_uxware · 02-08-2017

What I do to be sure, I ping a pfsense firewall on the vlan50. The switch has the 172.16.50.254 on this vlan and the pfsense has ip 172.16.50.1 What I did it is to look at the firewall log on this interface in dynamic view mode. While the switch was ...

plg_uxware · 02-08-2017

Sorry, for the delay. I didn't see your answer until Dennis ask me to follow your advise. So what I do. All the ip configured on the switch. IP Address I/F I/F Status Type Directed Prec Redirect Status ad...

Member Since	‎09-09-2016 02:11 AM
Date Last Visited	‎06-04-2018 01:55 PM
Posts	7

User Statistics

User Activity

Can't ping from SG500-52 to vlan directly connected

Hello,

Your right it's on this port.

Yes, you'll find it attached.

What I do to be sure, I ping

Sorry, for the delay. I didn