Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,Can somebody explain to me why the below question has that answer?xFrom my understanding, the ABR creates type 3 LSA. So a type 3 LSA received from a nonbackbone area will be received in area 0. Further, the ABR generates a new type 3 LSA for o...
Hello,
I configured BGP between directly connected routers, as below:
R1 --eBGP-- R2 --iBGP-- R3 --eBGP --R4 --eBGP-- R1
(also image attached).
Maybe it's a silly question, but it is unclear for me why R4's loopback (14.0.x.0/24) is received via eB...
Hello @Ramblin Tech,Thank you for your response! I have ASR-9006 with the below details for the FAN tray. I would be grateful if you can point me to the documentation where it is written if it was front-to-back or back-to-front airflow. Also, if ther...
Hi @Ramblin Tech, @Flavio MirandaI have access to a physical ASR9k. Unfortunately, show environment from admin mode is not displaying fan direction.RP/0/RSP0/CPU0:R1(admin)#show environment fans detail^% Invalid input detected at '^' marker.RP/0/RSP0...
Thank you!
R2(2.2.2.1) do not advertise R4LO to R3(2.2.2.2), but R3 indeed advertises R4LO to R2. I understand why R3 will not use the path via R2 but use it direct connect path, as this one will appear in the routing table. But why isn't 14.0.x.0/24...
