About db

db · 08-15-2017

Hello Can anybody tell me why the following config does not work in trunk mode? interface GigabitEthernet1/0/1 switchport access vlan 30 switchport trunk native vlan 30 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk If this config i...

db · 08-15-2017

It is a hardware device WS-C3850-24XS with the image cat3k_caa-universalk9.

db · 08-15-2017

Yes, without the access port command the port is working properly.

db · 08-15-2017

The client send his traffic untagged. If I am right the command "switchport trunk native vlan 30" is a kind of fallback and the traffic is carry in vlan 30 but the client does not need to tag his traffic. If i remove the command switchport access v...

db · 08-15-2017

That's what I thought so. But in my case the client is working in mode access with "switchport access vlan 30". So now I want to tag this port. I configured mode trunk. Now the client should fall untagged in vlan 30 because "switchport trunk native v...

Member Since	‎09-16-2016 12:23 AM
Date Last Visited	‎08-24-2018 02:02 AM
Posts	5

User Statistics

User Activity

Access and Trunk in one port config

It is an hardware device WS

Yes, without the access port

The client send his traffic

That's what I thought so.