Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys!Has anyone here ever had a case like this?The MS390-24UX switch is not updating, We tried to do a staged upgrade just for this switch, but it didn't work. In addition to taking 1 hour to return to operation after the upgrade attempt, it is sh...
Hi everyone,Clients of wireless networks keep roaming between APs while having good signal strength and stable connection. Some cases we observed that clients roam to worse signal strength radios on their own, causing impact for the users during vide...
Hello guys! Would it be possible to visualize the signal coverage of the Access Points when importing the customer's floor plan and positioning the Access Points on the Meraki Dashboard?Thank you!
Hi everyone, thanks for everyone's comments.After 24 hours with the switch showing the message: Not running the configured version. The switch automatically underwent the Reboot (Firmware Upgrade) process and updated to the stable version 16.7. It is...
Hi everyone, thanks for everyone's comments.After 24 hours with the switch showing the message: Not running the configured version. The switch automatically underwent the Reboot (Firmware Upgrade) process and updated to the stable version 16.7. It is...
Hi everyone, thanks for everyone's comments.After 24 hours with the switch showing the message: Not running the configured version. The switch automatically underwent the Reboot (Firmware Upgrade) process and updated to the stable version 16.7. It is...
Hi Jackson! From my own experience, It's better to turn off the Switches as recommended by Meraki and after turning them on, provision their stack. Even so, if the switches are already in production there may be some bugs or failures of not fully pro...
