Dear Cisco!now we have 2 switches: SF300-24on one SF300-24 we config it at layer 3 mode with VLAN configuration same as followingVLAN ID 2 (ports: 2 -6) have ip interface  192.168.2.254/24VLAN ID 3 (ports: 7 - 10) have ip interface  192.168.3.254/24V...

Dear Cisco Support1Could you please check active-standby function on SF300?thanks!See you soon!

I had made a DHCP server that had many scope:1- scope: 192.168.1.208/282- scope: 192.168.1.224/283- scope: 192.168.16.0/24and DHCP server : IP address: 192.168.16.1so we config SF300-24 with 3 VLans1- VLan2: IPv4 address: 192.168.1.222               ...