Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,From cisco FTD 2100 i am trying to download the image but every time i try SCP or tftp it is failing. When I am trying from SCP server to FTD. SCP server ask for FTD password then fails and vice verse is failing too. I think to push image from...
Hi All,I have a cisco FPR 2130 i have connected eth1/13 and eth1/14 with 10G LR SFPs with a device called IXIA its a point to point connectivity. On IXIA i have an SFP called (Ixia, QSFP+ 40GBASE-PLR4 40GE pluggable optical transceiver, SMF (singlemo...
Hi All,I would like to ask a question regarding an upgrade of ASA code from pre 8.3 to post 8.3 config coversion.I have many NAT statements which are self Natting below is the example. Can they be removed before converting the config to 8.3+ version ...
Hi, I am trying to download image from FTP server my config is given below. I am not able to ping Gateway neither ftp server. Am I missing anything here ? rommon 1 > setADDRESS=10.178.224.179NETMASK=255.255.255.0GATEWAY=10.178.224.254SERVER=10.176.57...
ping from tftp server$ ping 10.178.223.11810.178.223.118 is alive$on ftd cli not letting me type file name i want to send to tftp > copy disk0:cluster: Copy to cluster: file systemdisk0: Copy to disk0: file systemflash: Copy to flash: file systemftp...
Even "//" didnt helpwnlb-vpnfw-1a /firmware # download image tftp://10.176.57.157/export/netadmin/FTD-IMAGE/cisco-ftd-fp2k.6.7.0-65.SPAPlease use the command 'show download-task' or 'show download-task detail' to check download progress.wnlb-vpnfw-1...
After multiple tweaks in my testing I clicked the option called "split rate evenly among ports" (screenshot attached) seem to bring down the loss on 1500 MTU to 0% when line rate is 90%. Previous i was using "Apply rate on all ports" which was causi...
Thank you so much excellent explanation, previous i created single stream which was causing RX ring throughput overrun. Later I created a multiple stream which was causing issue with 1500 MTU but with 9000 MTU seem good with no loss. Now after multip...
