FTD 2100 ROMMON can not ping FTP server

[abideen.shaikh1]

Hi,

I am trying to download image from FTP server my config is given below. I am not able to ping Gateway neither ftp server. Am I missing anything here ?

rommon 1 > set
ADDRESS=10.178.224.179
NETMASK=255.255.255.0
GATEWAY=10.178.224.254
SERVER=10.176.57.157
IMAGE=export/netadmin/FTD-IMAGE/cisco-ftd-fp2k.6.6.1-91.SPA
CONFIG=
PS1="rommon ! > "
addres=10.178.224.179
netmask=255.255.255.0
gateway=10.178.224.254
image=cisco-ftd-fp2k.6.6.1-91.SPA

rommon 2 > ping 10.178.224.254

link upSending 10, 32-byte ICMP Echoes to 10.178.224.254 timeout is 4 seconds
?? [CTRL-C]
Success rate is 0 percent (0/10)

[abideen.shaikh1]

One thing i can think of is this procedure can not be completed using management link only data ports can be used?

[Karsten Iwen]

The wrong port could be the reason. There are other ways like USB available. Perhaps that will be easier:

https://www.cisco.com/c/en/us/td/docs/security/firepower/2100/troubleshoot_fxos/b_2100_CLI_Troubleshoot/b_2100_CLI_Troubleshoot_chapter_011.html#task_n5q_3v1_hbb

[abideen.shaikh1]

Thanks for the response is there any way we can change the port to mgmt0?

[balaji.bandi]

as suggested easy fix is USB :

https://www.cisco.com/c/en/us/td/docs/security/firepower/2100/troubleshoot_fxos/b_2100_CLI_Troubleshoot/b_2100_CLI_Troubleshoot_chapter_011.html