About bnk0000011

bnk0000011 · 09-23-2016

Hi, One quick question. Is the Cisco UCS vic 1227 a single point of failure. I ask because we have just updated our Cisco server to 3.1.2b, and it failed badly. It looks like the MLOM update has failed, and now we cannot make it to work again, so th...

bnk0000011 · 09-26-2016

Yes, the error started after we applyed new Host firmware package 3.1.2b. We do not know which component that generates this erro. The SEL log is not logging anything after the update. It is repporting1 Critical errors 1. [FSM:FAILED]: rack-Mount ser...

bnk0000011 · 09-26-2016

Yes, I can connect with UCS Manager to CIMM. The error is seen in UCS Manager under the tab FSM. It is not stuck, but tries Step 55 many times, and then starts from step 1 Again. And does that repeatedly.

bnk0000011 · 09-25-2016

Yes. auto install of UCS and Interconnect ... no problems. They are now on ver. 3.1.2b. We tried to upgrade 4 servers, to 3.1.2b also, and all went wrong. We have only rack mounted servers UCSC-C240-M4SX. FI model UCSC-C240-M4SX MLOM is vic 1227 m...

bnk0000011 · 09-24-2016

Yes and Yes;) UCS and Fabric Interconnect was done by auto install, and the server was updatet using Host Firmware Package. No mater what i try the FSM stops at Setting of NIV mode failed. I have tried the following on the server: Re-acknowledge, Dec...

Member Since	‎09-23-2016 08:19 AM
Date Last Visited	‎12-14-2017 12:02 AM
Posts	5

User Statistics

User Activity

Cisco UCS vic 1227 single point of failure

Yes, the error started after

Yes, I can connect with UCS

Yes. auto install of UCS and

Yes and Yes;)