I am trying to allow RDP through my 891w.I have tried a few different yjing to no avail.Here's my configversion 15.0service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname X...
That Worked. Here's what I didno policy-map type inspect ccp-pol-outtoinpolicy-map type inspect ccp-pol-outToInclass type inspect match-all ccp-cls-ccp-pol-outToIn-1inspectzone-pair security ccp-zp-out-zone-To-in-zone source out-zone destination in-z...
Here is the latest 'sh access-list RDP'. its the same before and after the test. Extended IP access list RDP 30 permit tcp any host 192.168.10.140 eq 3389 40 permit udp any host 192.168.10.140 eq 3389 50 permit tcp any host 192.168.10.140 ...
This didnt make a differenceExtended IP access list RDP 30 permit tcp any host 192.168.10.140 eq 3389 40 permit udp any host 192.168.10.140 eq 3389 50 permit tcp any host 192.168.10.140 60 permit ip any host 192.168.10.140
I think this is the issue:Zone-pair name ccp-zp-out-self Source-Zone out-zone Destination-Zone self service-policy ccp-permitZone-pair name ccp-zp-in-out Source-Zone in-zone Destination-Zone out-zone service-policy ccp-inspectZone-pair ...
I am doing RDP from Outside. how do I check the hits on the RDP ACLI see thisValumed#sh access-list RDPExtended IP access list RDP 10 permit ip any host 192.168.10.140 (24 matches) 20 permit tcp any host 192.168.10.140 30 permit tcp any hos...