I currently have two point to point VPN connections set up. I gave one client the outside IP address of my firewall. I gave the other client the IP address that shows up when I go to www.whatismyipaddress.com. They are different IP addresses. Why...
I'm installing 2 ASA 5510s, one as the primary and one as the failover. If I use a Netgear 10/100 Fast Ethernet 5 port switch in between the firewalls and the ISP's, will I be creating a bottleneck?
Are ALL versions of ASA not vulnerable? We are on version 8.2(5). We are also using VPN Client 5.x, which is not mentioned in the list. Is it vulnerable?
Our network looks like this:LAN--------------ASA------------WAN Load Balancer---------------ISP1 & ISP2So all traffic goes through the load balancer first, IP addresses are translated then sent to firewall. I am still not clear which IP address I sh...
Here are my crypto map statements. Which one do I remove?crypto map mymap 30 ipsec-isakmpcrypto map mymap 30 match address outside_cryptomap_30crypto map mymap 30 set peer x.x.x.xcrypto map mymap 30 set transform-set ESP-3DES-SHAcrypto map mymap 655...
Here is my config file. What should I change?interface ethernet0 autointerface ethernet1 autonameif ethernet0 outside security0nameif ethernet1 inside security100enable password xx encryptedpasswd xx encryptedhostname fm-fwdomain-name sfcc.orgfixup ...
Actually a better example of the ip addresses that I need to give access to are the following:129.41.169.51129.41.169.52129.41.169.53129.41.169.54129.41.169.55Will this work?