Can someone please suggest the least expensive device that will support the specs I have listed below? (which isn't about to be EOL)1 WAN - 100MB (ethernet full duplex - allow for DHCP or static)4 LAN - 100MB or possibly 1G - DHCP (Range and/or e...
Where do you set up a Static host translation? let's say (for example) the public address is 64.233.169.147 and I need to map it to 192.168.1.150 where do I set this? I can then set the firewall rules to allow the specific inbound traffic? Please...
so for the time being, until I purchase a Cisco RVL200 4-Port SSL/IPsec VPN Router, I will just port forward and allow the default firewall rules of any, any. Thank You.
I mean more like: ip nat inside source static 192.168.1.254 x.x.87.171 route-map IP_NAT_STATIC_ROUTEMAP_1 extendableI have a couple of servers on the LAN and I need to make sure there are static maps for each of the servers. The port forwarding do...