Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Every body.I have a Cisco Catalyst 3560 and it has a power suply crash. It was fixed and now it has another problem: When I turn on the switch, it's appear with this message:POST: PortASIC CAM Subsystem Tests : Beginram_access_test Failed. ASIC: 0...
Buenas noches. Tengo un Cisco Catalyst 6500 con un módulo Firewall el cual tiene la siguiente configuración en el Switche:firewall module 4 vlan-group 10,20,30,40,50,60,70,80,90,100,140,190,200,300,310,350firewall vlan-group 10 10firewall vlan-group...
Hi. In my office I have a Pix Firewall 525. That equipment had the 6.3 software version and it was updated to 7.2(4) and now I have a problem: When I try to do a Videoconference with a Polycom Camera, is no possible to connect. I've checked the proto...
Hi. I have a problem with VLAN that is in a FWSM. This belongs to Vlan computer rooms that have private address 172.16.0.0 mask 255.255.248.0, the IP addres of the VLAN in the FWSM is 172.16.0.1 - 1 months since I am experiencing the PING between PC'...
Hi. I've configured a FWSM with a Core6509 and I have this problem: In the Core I configured a Vlan90, The procedure was: Vlan Database --> VLAN90 name DMZ1 --> VLAN90 state active --> exit. Next I done this command: firewall vlan-group 90 90 --> fir...
Ops Rahul, bad news.At the begining I was thinking in that, but I was waiting for the expert's opinion, in fact, I had a little hope.I appreciate your help.Thans a lot.Francisco Velasco
Ops Mr. Sharifi. t the begining I was thinking in that, but I was waiting for the expert's opinion, in fact, I had a little hope.I appreciate your help.Thans a lot.Francisco Velasco
Hi, Mr. Kusankar.I appreciate your help in my question. I made all your instructions and it's working perfectly.Thanks a lot and I wish you a happy day.Regards.
Hi Paul and I apreciate your help, but it was the first instruction I checked, and that instruction is ok. I don't now if is necesary all the protocols that you say me, because my pix only has the following: policy-map global_policy class inspection_...
Hi. Thanks for your answer. You have reason for that opinion, but in the access list, at the end is the sentence --> access-list dmz1_in extended permit icmp any any Is this not enough??Thanks a lot.
