Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have been out of town for a while and have not had a chance to work on this. But I am having an issue with the TBA device when I went to go upgrade it I don't have the option anymore. When I right click the device it does not give me an upgrade ...
I just deployed the devices on my network and had an immediate problem. I diagnosed it down to the switch being the issue. Here is my setup:I have a POE switch currently to connect my POE Linksys IP Phone's. I have 6 SPA942 Linksys Phones. Two of...
To start, the issue is now resolved and the customer site is up and running. I pulled the TBA device from our office that was working and was getting ready to take it to the customer site. I was talking to the owner or our company Karl Palachuk and ...
Sorry it took so long to get this done. It has been a crazy spring.I have tried a factory reset, and a reload of the firmeware on the switch and I still cannot get my TBA device to boot properly. I have tried 2 different flash keys and 2 different ...
I am having the same exact issue on the new device that was sent to me. I can ping the device, solid green power, diag 3 second intervals, ethernet shows traffic, USB sold green, Flash no light. I rebooted and tried a different port and still the s...
I verified that the USB key is in the device firmly. I did a format of the device on a Windows server and was able to access it through the windows server just fine. So I know the USB device is working properly.
I am having the same or simillar issue. I boot up the TBA it sees the flash drive because the flash drive flashes for a little bit. But then the diag light flashes for 3 seconds, off for 3 seconds, solid for 3 seconds and repeat. I can ping the d...
