Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi folks, I'm beating my head against the wall trying to see if this is doable. Here's the scenario I'm working with:End users want to be able to access production systems over VPN. I have Cisco ASA and Cisco L3 switches.I have two VLans built for t...
Hi folks, I hope ya'll can help me out here. Please be kind: I've been thrown into the network admin role unexpectedly and I'm still learning.I have a 2960cx switch that I'm trying to re-purpose onto my network. I've got it configured how I like, h...
I was able to solve this by creating a new group policy on the ASA. I set up split tunneling https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/70917-asa-split-tunnel-vpn-client.htmlHad to create a new ACL...
I'm a fool!Thanks all for your suggestions!I forgot to set the switchport on the connecting switch to be a trunk port.I had only set the switchport on the new switch to be a trunk port.As soon as I set this, VTP started working exactly as it should!A...
Tried this with no success.How do I set MD5 digests? It's my understanding that the MD5 is generated by a combination of the domain name, password, version, and some other magic ingredients?
Deleted vlan.dat and a reload.That cleared out vtp domain name and set the switch to server mode.However, it retained the 6 VLans. I set the domain name and switched mode to client, and still no luck.I'm getting a different MD5 digest than before wit...
