Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a highly mobile environment, where I need any non-root bridge to associate to any root bridge, except that, for each bridge there is one pairing that must not occur.ie: I want to allow all non-root bridge to associate to any root, except on...
I have two root bridges - A & B - and I have one non root bridge - Z. The bridges A & B are broadcasting the same SSIDs and so Z can associate to either of them. The directional antennas, line of sight and everything has been set so that Z would obvi...
I have this exact issue also. I have a 1310 bridge I have LWAPP-ed & I now need to get it back to autonomous mode. I can run the tftp_init command but nothing happens (no packets either according to packet sniffer) when I run the "tar -xtract..." com...
So,What I have is a network in each vehicule, that I want to link together when the vehicules come in range. Typically, once linked, they will be in range for many hours before moving apart again.Thanks for your help by the way!!Steve
OK,So the scenario I have is vehicule to vehicule bridge links. The objective being any one vehicule can associate to any other one vehicule.The first puzzle is about root/non-roots. For example, if you put a root in one vehicule, then it will not as...
Well, I thought about filtering, which I guess I can do by MAC or IP address, but that still allows the association. The problem I have is that if the non-root end associates and is then filtered, then it will not associate (I think) with another roo...
