Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,i have a network splittet with a pix. The 192.168.111.0 at the outside interface of the PIX and the 192.168.110.0 at the inside interface.From the inside interface everything to the extern (192.168.111.0 network) is allowed. But no access from ...
Hi,iam using a ASA 5505 and connect with the Cisco Client 5.0.02.0090. The Client connects to remote LAN and get a IP Adress from the ASA.But i can not access the remote LAN or ping the intern Interface of the ASA.Anyone can help me with this issue?
Hi Federico,if i apply your commands i can successfully acces the server at 192.168.110.0 subnet with the backup programm.But i lose the connection from 192.168.110 subnet to 192.168.111.0.The 192.168.110.0 subnet dont have any access to internet or ...
Federico,i will try this configuration at the PIX today.But.... static (inside,outside) 192.168.110.0 192.168.110.0 netmask 255.255.255.0two times 192.168.110.0? Is that ok so?Sebastian
Thanksi attached a picture of the network. The green arrow shows the access i need with the special ports.Only the 192.168.111.100 should can access to 192.168.110.0 subnet with the special ports.Sebastian
Hi Federicono the server 192.168.111.100 is the backupserver (WAWI-SBS) and is located at the outside interface of the PIX.I need to access a server in 192.168.110.0 subnet from the outside of the PIX.I set the static NAT: static (outside,inside) 192...
