Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an existing network with the primary router being a Motorola Netopia 3000 provided by AT&T for their DSL service. Internal gateway is 192.168.1.3I want to isolate a network group on their own router behind the Motorola, while still providing ...
YEAH .. Got the printer working by manually setting it up the way you showed through create new port. Works great.NAS entered into explorer address bar brought up web browser and thus web browser interface .. Getting closer though. Can you MAP a driv...
(Michael, is the printer behind the Firewall similar to Matthew's. If so did you forward port 80 to the printer and thats how you are hitting the printer? I am a little confused on your setup because I was actually answering the question as if Matthe...
I am able to enter the network printer address and go straight to it's Web interface .. I cannot however seem to get ADD printer to find it that way. Any ideas ?Michael
Perhaps I explained this wrong ..Primary Internet Router - 192.168.1.3Within this network are hostPC, PC and NAS file servers, printers, etc., addressed 192.168.1.10 - 254Subnet Router 0 Cisco RVS4000 WAN External IP is set at 192.168.1.4 ...
Thank you .. that gets the subnet working and internet access functioning also.So with your help, my RVS4000 is a subnet of the Netopia network.Now I need to be able to allow people on the new subnet to access file servers on the other netopia networ...
