Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
i have issue i read a lot about it but i am still not sure of what action to take.
i have client wants to access server in the dmz using RDP but its so so slow to connect to it , take up to 5/10 minutes to connect and sometimes its fail.
**...
Hello,
i have issue after upgrade to 9.6 , i am not able to access ssh with the same ip anymore , as show in the attached photo i can do ssh from any interface , and from any ip behind that interface.
that happen only when i upgraded , also after i...
hello,
i have issue for few days , thought updates will solve it but its noti have attached screenshot for it , wish to know what is this issue , and how to solve it
thanks
hello all
wish to find help in this topic wish to get fast description from here side by side with my Owen search.
i have 5545 ASA with FirePOWER .
i have so
problem is solved , and its issue and will be solved in the next release
many rules an...
Hello,
i have issue in my network , as part of the work we need to connect to outside PPTP server but its always fail , works only if we connect directly to the gateway router.
back behind the ASA the client cant connect , what is driving me crazy ...
you should check if you have proxy in ur network , if you have one you should configure the firepower for it , if not then you should contact your reseller or cisco TACto help out in this.
i had same as your issue , but i found out that i add the IP of the FirePOWER under one of my rules that dont allow him to get updates . so i allowed him for all and that ssolved the issue for me.
Note : i had other issues with FireSIGHT Virtual App...
thanks for your fast reply , i will try to clarify the issue more , sorry if didn`t mention that above.
i used to connect on 192.168.3.1 , the outside interface ip of the DC-ASA
also there is 172.16.30.1 and 10.1.127.240 , both are ip of interfaces o...
hello Jetsy,
below is the output of the above command , is there are anything abnormal ?
root@Sourcefire3D:~# pmtool status |grep sftunnelRequired by: SFDataCorrelator,ui_archiver,TSS_Daemon,HostInput_Daemon,sfestreamer,estreamer-sftunnel,fpcollect...
