Hi,We have purchased a breakout/scalability cable for UCS 6324.  I have connected ports 1 and 2 from the cable to two C200-M5 with VIC1387 adapters, but status of ports in UCSM is Link Down.  They are both Admin enabled and configured as Server Ports...

Hi, We have M3 b- and c-series servers and would like to refresh the hardware with M6. I understand that M3 and M6 in the same UCS domain won't work as there is no common firmware version, correct? M6 required 4.2 or higher, which does not support M3...