Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Howdy,We have presented a number of luns from our eva3000 disk array to our HP-UX host. The vsan and zoning is correct as far as we can tell & the luns can be seen correctly by a host plugged into the same switch as the array. The problem is that the...
Hi Stephen,The RP can more often than not just be a temporary step as the client host, once set up, finds a better path to the source and prunes the "longer" route via the RP.Reading your posts again it seems like the 6500 that is configured as the R...
Hello,I always find multicast tricky and mix that with firewall rules and you double the troubleHave you explicitly allowed the returning traffic through the ASA?You can't get a stateful connection with multicast so you have to allow IGMP joins etc b...
Hello,Have you specifically allowed the return traffic?Even with all of the IGMP settings and pim enabled properly there is one more thing to do...Remember that multicast traffic isn't handled the same way as nice "stateful" unicast traffic by the fi...
Hello,Multi-core CPU's can experience "Time Stamp Counter" (TSC) drift. This drift between the times on the cores throws out the ping timings.Go to www.hp.com and search for c01075682 - this is a doc that explains what is going on. You should be able...
