About mohammed saadi

mohammed saadi · 06-16-2022

dears ,i have 2 cisco catalyst C9500-48Y4C my problem is when i insert SFP in any port of the switch the port is reading the SFP (please check attach below) but the port is not going up , i checked all the physical component's from SFP , Fiber cable...

mohammed saadi · 06-17-2022

What is the exact firmware of the switch?-Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.9.4

mohammed saadi · 06-17-2022

Only on that port - any port in the Cat 9500 ?- the problem on all ports in switch 9500 . You confirmed that this SFP working with other models of switches, same one not working on Cat 9500 ( any port or specific to port ?)- same SFP is not working o...

mohammed saadi · 06-16-2022

so you mean its need reboot or upgrade the firmware ?

mohammed saadi · 06-16-2022

no its not working with any SFP type now (cisco and 3rd Party ) . this sfp has been tested on other switch and worked normally.

mohammed saadi · 06-16-2022

the port in the original post is for testing but the correct is twe 1/0/12 .the SFP that i use it is cisco GLC-LH-SMD this type of sfp now is working on another ports in same switch (please see attach below) but if i disconnect it and reconnect the p...

Member Since	‎06-16-2022 12:43 AM
Date Last Visited	‎08-10-2022 12:04 AM
Posts	9

User Statistics

User Activity

port down

Re: port down

Re: port down

Re: port down

Re: port down

Re: port down