About maciektom

maciektom · 06-17-2022

HiI'm looking for help to set correct port settings on C2960 to match MOXA EDS-208A unmanaged switch.We replaced MOXA with Cisco WS-C2960L-24TS-LL and after this we experience disconection on our industrial devices.Before an upgrade on MOXA switch ev...

maciektom · 06-18-2022

PLC controllers are loosing connections with rest of the network, and it is just for a few seconds or even miliseconds.We did one more test, we connect 6 PLC controllers to MOXA EDS-208A and then one patch cable to CISCO C2960 switch, and with this s...

maciektom · 06-18-2022

Could it be something with EEE status- energy saver option? Should I disable it?

maciektom · 06-18-2022

Please see below config,the problem is logging is not showing disconnections, only our end devices are. But this was not happeing while connected to MOXA. End devices are PLC controllers Building configuration...Current configuration : 4713 bytes!! L...

maciektom · 06-17-2022

Sorry I meant we repalce MOXA with Cisco switch and now we are facing issiues with disconnections with our devices.

Member Since	‎06-17-2022 10:41 PM
Date Last Visited	‎06-22-2022 12:08 AM
Posts	5

User Statistics

User Activity

C2960 port settings to match MOXA EDS-208A unmanaged switch

Re: C2960 port settings to match MOXA EDS-208A unmanaged switch

Re: C2960 port settings to match MOXA EDS-208A unmanaged switch

Re: C2960 port settings to match MOXA EDS-208A unmanaged switch

Re: C2960 port settings to match MOXA EDS-208A unmanaged switch