About triton.milossedlacek

triton.milossedlacek · 02-11-2016

Dear All, We are testing the WS-C2960XR-24TS-I for use in video applications dealing with IP multicasts. I want to ask if these switches (or routers) are suitable for routing of multicasts. We did notice that if we route multicasts between VLANs (in...

triton.milossedlacek · 02-25-2016

Yes, we re-enabled them back then. So now it works with the same configuration and same load as before. It seems we really got rid of some jammed process.

triton.milossedlacek · 02-25-2016

We finally shutdown the ports the majority of multicasts came in and reloaded the switch. After that the CPU is stable at ~35%. I have to mention that we had removed "no routing dynamic" command for both VLANS prior the reload. So it seems there was ...

triton.milossedlacek · 02-23-2016

Yes, we're still running the 100% CPU. Still the IP input the cause. Does it make sense to apply "ip cef" and "ip cef distributed" commands on global level in this case? Is it possible to check the TTL value of the input multicasts?

triton.milossedlacek · 02-23-2016

Hi after looking into sh run all, I have found these CEF commands: cef table consistency-check IPv4 type lc-detect count 71 period 60cef table consistency-check IPv4 type scan-lc-rp count 71 period 60cef table consistency-check IPv4 type scan-rp-lc...

triton.milossedlacek · 02-19-2016

Hi Mark, I have not looked into sh run all. The cif command might be hidden there. Thank you for your help so far. I'll let you know next week about our progress.

Member Since	‎02-11-2016 03:23 AM
Date Last Visited	‎06-12-2018 05:59 PM
Posts	10

User Statistics

User Activity

Multicast routing on C2960XR

Yes, we re-enabled them back

We finally shutdown the ports

Yes, we're still running the

Hi

Hi Mark,