Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everybody,I have a cisco 3550 Switch and 2900 through fiber, I have configured 5 vlan on the 2900 and 3550.on the 2900 I have created a Vlan Interface with the range for the vlan 4,2900(config)# interface vlan 4 2900(config-if)#ip address 192.1...
Hello everybody:I'm new on cisco environment, I have a Nexus 5020 and a cisco router and a T1 and csu/cdu on my network.The design of my network will be ok with this graphic attempt ?? the type of connectors on the switches are ok ?? or I have to use...
Wow thank you so much JayaKrishna, that is the problem, my firewall setting on my PC, I disable my firewall and works. But I don't know why with the my firewall configuration before work the ICMP and when I connect to the Vlan the firewall block the ...
Now I see that all IP Vlan Interface on both switches can ping from any location (Switch and PC) but the Machine IP Address cannot ping either Switch or PC. Somebody have any idea ?Thank you so much.
Sorry I had a mistake when I type the IP address. The IP address for the vlan 4 on the 3550 is 192.168.4.1 sorry it was my bad.Another thing, I get a valid IP adress for the 3550 DHCP server in Vlan 3 and 4 but when I type on the 3550show ip dhcp bi...
Hello Collin Clark, I have 5 servers and 150 Users, I planning 4 VLANs, 1 per floor (3) and another one for the servers but I dont know if is better connect the servers of this way or on the distribution switches ??? and the type of connector that I ...
