Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there. I one question to all cisco IDS/IPS professionals. If the management port only accept inbound traffic how can I then activate my Cisco 4510 IPS appliance to get automatically signature updates from cisco.com ? That one requires outbound tra...
Hi Everybody. I have question regarding the best practice design for my firewall and routing design. I need to create 30 new vlans that needs to be filtered in the firewall. So the traffic should pass through the firewall. These 30 new vlans will hav...
Hi there. I have this very strange problem. Can someone explain me why this is happening? I have two static. One of them is working fine. But the another seems to go thoug diffrent interface (mynoc).Config: static (dmz,outside) AA AB ...
Hi everybody,My new setup with WLC baesed guest access solution is working well. I am using web based login authentication for wired & wireless solution. And everything is running through out the WLC. The WLC is granting access to is the internet for...
Hi Karsten, I cannot test with FTP because I dont have any FTP servers availeble. But when try to get updates from https://72.163.4.161//cgi-bin/front.x/ida/locator/locator.pl I dont see any outbound traffic from my IPS appliance. Are you sure about...
I already configured ip address ón my management port. Will thar mean that it should be possible to inititativet trafficking from that port ? Sent from Cisco Technical Support iPhone App
I thing I can solve this by creating two /30 subnets for each phycial interface. On the firewallInterface1: Subinterfaces/VLAN 1 to 15 (All VLANS has there own /24 subnet) - VLAN 31 with /30 subnet with the higest sec level. VLAN 31 is created to com...
Thx for reply. Can I solve this by creating /30 subnet for routing reason between the router and firewall? But what about if I want to use two physical interfaces with 15 VLANS each. Do I need to create two IP´s on the router?
